Etesia SKD, User Manual, Page: 7 / 28

A
B
C
D
E
F
G
H
J
I
7
2• KEY TO DIAGRAMS - USE
A - ADVANCE
F :
forward top speed
N : neutral (stop)
R :
reverse top speed
B - ENGINE SPEED
START : position for starting the engine
MAXI : engine at full speed
MINI : engine idling
C - BY-PASS
1 : Lever in position I : by-pass closed = position advance transmis-
sion engaged
0 : Lever in position 0: by-pass open = position advance transmis-
sion disengaged
D - CUTTING HEIGHT
Indicates the cutting height in mm (measured on hard, flat ground).
E - LIGHTING
F - STARTING THE ENGINE
0 : engine off, power switched off
I
: power switched on
: engine started
G - OPERATING THE CUTTER
I
: cutter switched on
0 : cutter switched off
H - CONTROL SWITCH « MOW IN REVERSE »
Once the cutter is in operation, press this switch once to mow with
the machine in reverse.
Otherwise the cutter disengages as soon as you select reverse. It will
re-engage with the advance lever when it reaches Neutral or Forward.
If you disengage the cutter with the engage cutting system switch or if
a safety feature trips it, you will have to re-engage the cutter.
I - PARKING BRAKE
The arrow indicates the direction of movement of the brake pedal
in order to engage the parking brake.
J - DIFFERENTIAL LOCK
The arrow indicates the direction of pedal movement to lock the diffe-
rential.