background image

Année de fabrication

11066_06_012017i0

EC DECLARATION OF CONFORMITY

In accordance with Directive 2006/42/EC

We,

13, rue de l’Industrie, 67165 WISSEMBOURG CEDEX

declare under our responsibility that the thermal lawnmowers, type PRO51, references PRO51X and PRO51D, to which this declaration 

refers, fulfil all the relevant terms of directive 2006/42/EC applicable to them as well as to the provisions of all other applicable European 

directives :

 - 

2014/30/UE (from 26/02/14)

 

Electromagnetic compatibility

 - 

2000/14/EC (from 08/05/00)

 

Sound emissions in the environment by equipment intended for use outside  

  

buildings 

and guarantee that the thermal lawnmowers, type PRO51, references PRO51X and PRO51D, meet the requirements of Directive 2000/14/

EC regarding noise emissions in the environment, and are subject to the internal production control procedure, with evaluation of the 

technical documents and periodic inspection by a notified body, the CETIM, F - 60304 SENLIS CEDEX.

-  Average acoustic power level measured : 98 dB (A)

- Acoustic power level guaranteed : 98 dB (A)

M. Treger Claude

13, rue de l'industrie 67165 Wissembourg CEDEX,

is the person authorized to constitute the technical file. 

Assessment of conformity in-house inspection of machine manufacture according to Annex VIII of directive 2006/42/EC.

Done in Wissembourg, the 01.30.2017 

M. Patrick VIVES

The President

Due to their permanent improvement policy, ETESIA reserves the 

right to modify specifications.

Text and pictures without prior notice.

ETESIA SAS - 13, Rue de l’Industrie - F -  

67165 WISSEMBOURG CEDEX 

Strasbourg Trade & Commerce Register B343 510 996

Modell: 

Serial number:  

Summary of Contents for PRO51 D

























Reviews: