MIX-N-GO - User Manual Rev 5.2
Page 29 of 41
Problem
Cause
Solution
Bearings cannot be
greased
Copper pipe disconnected from
the greaser
Connect the pipe to the greaser
O
Greasing holes clogged
Address to an authorized
workshop
A
Oil leak around
transmission sump
Motor oil seals broken
Address to an authorized
workshop
A
Oil leak outside
Loose fittings
Tighten fittings
O
Hoses damaged
Replace hoses
P
Fittings damaged
Replace fittings
P
Motor oil seals leak
Address to an authorized
workshop
A
The hydraulic grill does
not open
Rotation pins seized
Clean and grease the pins
P
Cylinder stop valve stuck
Check the valve
P
Magnets not energized
Check the electrical system
P
Wrong hydraulic connection
Verify connection
O
3.4.
Trouble Shooting
Key:
-
For the solutions marked with letter A, address to an qualified shop.
-
For the solutions marked with letter P, the repairs must be carried by qualified personnel
-
For the solutions marked with letter O, the repairs can be carried by the operator
Summary of Contents for MIX-N-GO BMX-100
