1 4
G E N E R A L
OPERATION
E-STOP - Emergency stop button - stops all moving parts on the device. PRESS THE E-STOP
BUTTON AT ANY TIME TO STOP ALL MOVING PARTS AND TURN OFF THE MACHINE
Buttons on HMI Screen:
Control Panel Overview
Machine Start Up Sequence
START BUTTON - Green button energizes the motor to start turning the
belts. This button will be illuminated when in operation.
STOP BUTTON - Red button will stop the motor and stop the belts from
moving.
Speed Control - Up Arrow will increase the speed of the belts - Down Arrow
will decrease the speed of the belts. Speed adjustment goes from 1 to 11.
Ensure rear door of Sorter is properly closed.
1
2
3
4
5
6
8
9
10
11
7
Check and make sure Polycarbonate covers are properly in place.
Place totes under Slide-Outs to collect material.
Place tote on outlet shelf to capture larger sized material.
Plug the power cord into a 110V outlet.
Disengage the E-Stop.
Press the up arrow on the HMI Screen to increase the speed of the belts.
Adjust Hopper to allow for flow of material onto the belts.
Adjust Slide-Outs to desired sizing.
When totes are full, press the STOP/red button on the HMI to stop belts from
turning during tote changeover.
Press the Start Button (Green button) on the HMI screen which will start the
motor. When active, the Start/Green button will be illuminated.
