background image

26

USB Record 

USB RECORD - FREEVIEW/ SAORVIEW MODE

USB RECORD – FREEVIEW/SAORVIEW MODE - 

FOR MODELS WITH THE PVR FUNCTION ONLY

Built into this television is a USB record facility. This function is available in Freeview/Soarview mode 
when used in conjunction with a compatible USB memory stick or USB hard drive. The benefi ts of this are as 
follows:

 Pause live TV and then playback, fast forward and rewind (up to live TV)

 One button record, if you decide you want to record the current programme

 Easy programmable recording from the 7 day TV Guide

Due to the nature of the product, it is necessary to use a high speed USB memory stick (as the TV reads
from and writes to the memory stick at the same time, some memory sticks may not be suitable).

You can purchase high speed memory sticks from some computer stores, alternatively, we have a selection
of tested and compatible memory sticks available to purchase directly from the helpline/web site. 

Recommended Minimum Specifi cation

 - USB Memory Stick

Read Speed 

20 Mb/s (MegaBit Per Second) 

Write Speed 

6 Mb/s (MegaBit Per Second) 

If you wish to use a USB portable hard drive 
larger than 32GB, please refer to the FAQ 
section at the rear of this user guide.

Tip: When you switch the TV to standby or change channel the Time Shift memory is wiped. To restart 
time shift you must press play/pause button. 

Pause Live TV (Time Shift)

Pausing Live TV is very simple.

 - Press the play/pause button and the television will pause and the live 

content will be recorded. To resume watching press play/pause again.

 - Press fast forward to go forward in a recording (i.e. to skip adverts).

 - Press fast rewind to go back in a recording (i.e. if you fast forwarded 

too far).

Tip: This television contains one TV tuner, therefore it can only record the channel you are watching or 
record one channel while the television is in standby mode. 

Note: USB record function is only available in Digital/Freeview TV mode. Due to copyright laws and 
illegal copying/recording it is not possible to record to/from any other input/output source.

One Button Record

At any point in time you may decide to record the current programme that you are watching. To do this 
you need to press the red button highlighted below.

Playback fi les from Record list

To playback recorded fi les you will be required to have the TV set to the Freeview/Saorview source mode. 
Once set to the correct source, access the recorded list by pressing the REC LIST (Recorded List) button on 
the remote control, the recorded list should now appear on the screen, press OK on the chosen fi le to start.

User Guide - Eternity - 215-207O-GB-3B-FEGDP-UK - 236-207O-GB-3B-EGDP-UK - ETE-MAN-0014.indd   Sec1:26

User Guide - Eternity - 215-207O-GB-3B-FEGDP-UK - 236-207O-GB-3B-EGDP-UK - ETE-MAN-0014.indd   Sec1:26

14/02/2018   15:36:59

14/02/2018   15:36:59

Summary of Contents for 215/207O-GB-3B-FEGDP

































Reviews: