7
INSTALLATION
The water heater requires careful and correct installation to ensure safe and efficient operation.
This manual must be followed exactly. Read the “SAFETY GUIDELINES” and the
“IMPORTANT” sections at the beginning of this manual.
CONFIRM THE APPLIANCE SUITABILITY
Check the gas type label and the rating plate for the correct gas type, gas pressure, water
pressure and electrical rating for your application. Do not install this unit if these requirements
can’t be met.
The manifold pressure is preset at the factory. It is computer controlled and should not
need adjustment.
Occupants are advised of any inconveniences which could occur such as disconnection of
services.
You follow the electrical earthing procedure outlined in AS3500.4 before cutting or
uncoupling existing metallic pipework.
It should be as close as practical to the hot water outlets to minimise heat loss and cost.
The water heater does not require a fireproof back plate if installed on timber wall.
Rating Label Position
on Cabinet
Gas Type Label
Position on Cabinet
@@@@@@@@@@@
CAUTION
@@@@@@@@@@@
This equipment is not suitable for pool or spa heating.
Water hardness may affect the water heater. It may be damaged.
It is important that the water heater is installed in water conditions that are suitable for
its efficient, long use.
This is a water heating apparatus only and the final fitness of water delivered is
dependent upon the quality of water supplied to this system.
The connection, attachment, integration or general association of other equipment or
parts not specified by the water heater which either directly or indirectly affect the
operation or performance of this equipment –
could void the warranty.