Eternico AET-MSB500x, User Manual

Page: 8 / 37

8 ENGLISH
INSTALLATION
Pairing the Mouse with Another Device
-Open the battery cover and insert a battery (remove the protective foil from the battery).
A: Connection via 2.4GHz Nano Receiver:
1. Remove the receiver from underneath the battery cover.
2. Insert the receiver into the device that you want to pair with the mouse; the receiver will be
installed automatically.
3. Switch the mouse on; the mouse is ready to use.
B: Connection via Bluetooth:
1. On the bottom of the mouse, press the mode switch. The BT1 or BT2 LED indicator will
be turned on.
2. After the BT1 or BT2 indicator is turned on, press and hold the switch until the indicator
starts blinking, signalling that the mouse is ready to pair. If the LED is not blinking, hold the
mode switch for 3-5 seconds to initiate pairing mode.
3. S elect the option “Add Bluetooth device” on your device and look for the pairing name of
the mouse MSB500_3.0 / MSB500_5.0.
4. Confirm your selection; the mouse is ready to use.
Note:
If the mouse doesn’t work, check the battery, whether the mouse is turned off, and
whether it is within range of the wireless receiver.
Power saving mode
When it is not being used, the mouse goes into power saving mode to decrease electrical
consumption. You can wake the mouse up by pressing any button.