2
ShowCUBE™ DMX RGBWA+UV Eternal Lighting
Updated 01/2015
Introduction:
Thank you for your purchase.
The
ShowCUBE™ DMX RGBWA+UV i
s a DMX intelligent LED par
light. This LED par light is for the serious production company looking for high powered
LED output with (10) 18Watt 6in1 RGBWA+UV LEDs. The CUBE Series including the
CUBE3, CUBE4, CUBE5, CUBEecho, CUBEechoUV, EchoICON and EchoEDGE as well as the
ElitePar Series are designed in Houston, TX.
Unpacking:
Thank you for purchasing the
ShowCUBE™ DMX RGBWA+UV
light fixture. Every
ShowCUBE™
has been thoroughly tested and has been shipped in perfect operating
condition. Carefully check the shipping carton for damage that may have occurred during
shipping. If the carton appears to be damaged, carefully inspect your fixture for any
damage and be sure all accessories necessary to operate the unit has arrived intact. In the
case damage has been found or parts are missing, please contact the manufacturer or your
dealer for further instructions. Do not return this unit to your dealer without first
contacting them.
Each
ShowCUBE™ DMX RGBWA+UV purchase includes:
ShowCUBE™ DMX RGBWA+UV
Adjustable Telescoping Tripod (Maximum Extended Height 8 Feet)
Removable Hanging Bracket
Padded Soft Carry Case for the
ShowCUBE™
Carry Bag for the Tripod
Lens Kit "Spot" and "Wash" (Wash Lens Installed)
Charging Cord
FIRST CHARGE YOUR FIXTURE FOR 6 HOURS
.
Plug the IEC power cord into a
power strip connected to a wall outlet that supports 100-220V/50-60Hz. Have the Power
Switch in the OFF position and Receiver Switch in the OFF position. Securely, plug the IEC
power cord in the Power Input on the side of the light fixture. The Battery Charge Indicator
will illuminate Red while charging or illuminate Green when light fixture reaches 80% or
higher battery charge.
NOTE: You can be charging the
ShowCUBE™ and turn on the Power Switch to use the fixture.
Warning!
To prevent or reduce the risk of electrical shock or fire, do not expose this unit to
rain or moisture.
Caution!
There are no user serviceable parts inside this unit. Do not attempt any repairs
yourself; doing so will void your manufactures warranty. In the unlikely event your unit
may require service please contact the manufacturer or your dealer.
