Premier150 Spot
Eternal Lighting Feb 2016
•
Press UP or DO WN if you want to browse or change through the various Setup O ptions
•
Press EN TER to save your settings or EN TER the next menu
•
Press UP or DO WN to change values (Add or subtract)
•
Press FUN C to return to the upper menu one by one
To Set The DMX Start Address:
Each projector must be given a DMX start address so that the correct projector responds to the
correct control signals. This DMX start address is the channel number from which the projector
starts to “listen” to the digital control information being sent out from the controller.
The fixture has 3 DMX modes.
•
Simple mode
•
Standard mode
•
Extended mode.
For example standard mode has 18 channels, so set the No. 1 projector’s address 001, No. 2
projector’s address 019, No. 3 projector’s address 037, No. 4 projector’s address 055 and so on.
Launch the projector. Press button ENTER more than 5 seconds to unlock panel
Press the UP or DOWN to set the address
Press ENTER to save the command and will remember what is saved after you unplugged the fixture
Press UP or DOWN to change values
Press FUNC to return to main menu
Operation Menu
Level 1
Level 2
Level 3
Level 4
LE D Stage Light
150W Le d S po t
DMX Address = 001
LE D Stage Light
150W Le d S po t
Auto = P01:S 01
LE D Stage Light
150W Le d S po t
Mast er = P01:S 01
LE D Stage Light
150W Le d S po t
Slave = P01: S01
LE D Stage Light
150W Le d S po t
Slave same
LE D Stage Light
Address S et up
LE D Stage Light
Address S et up
Address = 001
LE D Stage Light
Re set
LE D Stage Light
Re set Eff ect s
LE D Stage Light
Re set Pan & Tilt
LE D Stage Light
Re set Co mplet e
LE D Stage Light
Manual O pe ratio n
LE D Stage Light
Manual O pe ratio n
Pan
LE D Stage Light
Manual O pe ratio n
Pan = 000
LE D Stage Light
Manual O pe ratio n
Tilt
LE D Stage Light
Manual O pe ratio n
Tilt = 000
LE D Stage Light
Manual O pe ratio n
Re d
LE D Stage Light
Manual O pe ratio n
Re d = 000
