Premier150 Spot
Eternal Lighting Feb 2016
Safety Measures:
The projector is for indoor use only, IP20. Use only in dry locations. Keep this device away from rain
and moisture, excessive heat, humidity and dust. Do not allow contact with water or any other
liquids.
DO NOT mount the projector directly onto an inflammable surface
The projector is only intended for installation, operation and maintenance by qualified personnel.
The projector must be installed in a location with adequate ventilation, at least 20 inches from
adjacent wall surfaces. Be sure that no ventilation slots are blocked.
Do not project the beam onto in
ammable sur faces, minimum dis
5 inches.
Avoid direct exposure to the light from the lamp. The light is harmful to the eye. Do not attempt to
dismantle and/or modify the projector in any way.
Electrical connection must only be carried out by quali
ed per sonnel.
Before installation, ensure that the voltage and frequency of power supply match the power
requirements of the projector. It is essential that each projector is correctly earthed and that
electrical installation conforms to all relevant standards.
Do not connect this device to any
other types of dimmer apparatus.
Make sure that the power-cord is never crimped or damaged by sharp edges. Never let the power-
cord come into contact with other cables. Only handle the power-cord by the plug. Never pull out
the plug by tugging the power-cord.
Keep a projector’s optical system clean. Do not touch LED lens with bare hands.
The projector should always be installed with a secondary safety cord.
Shields and lens shall be changed if they have become visibly damaged to such an extent than
their effectiveness is impaired, for example by cracks or deep scratches.
LED lamps should be replaced if damaged or having reached life limit.
Exterior surface temperatures of the luminaire after 5 minutes operation is 55C°, when steady
state is achieved 70C°.
There is no user serviceable parts inside the projector do not open the housing and never operate
the projector with the covers removed.
If you have any questions, don’t hesitate to consult your dealer or manufacturer.
Features:
•
RGBW 150 Watt LED
•
Output Lux @ 1m 40700 and @ 2m 12300+ (Comparable to 575 Watt Bulb)
•
Light Source: 150 Watt RGBW LED - 60,000 Hour LED Engine Life
•
Drive current 2.25 Amp
•
Electrical Input Voltage 90 ~ 240V AC 50-60Hz
•
Power Consumption 125W max at full output
