Battery Capacity
Battery Percentage Indicator
(90-100% is Fully Charged, 20-30% is Low to Depleted Battery)
Note: Light will shut off around 20-30% left on Battery Capacity
LCD Display time
Full on
10s/11s/12s…60s
IR INFA
Enable/Disable
Menu
:
•
Start Up –
Welcome to Eternal Lighting Screen
•
Switch to Display-
When blinking, choose Program RGBWA or RGBWA+UV, press
UP and Enter
•
DMX Address and Channel Mode
– Press Enter to move up and down between
DMX Addr and CH. Press Down/Up to scroll through choices. Press Enter to save a
command then press Menu to back out.
•
Master/Slave
– Press Up or Down to change the command of Master or Slave, Enter
to save the command. (NOTE: In order to use the IR Remote, put the fixture in
Master Mode. The fixture will not respond to the IR Remote if it is in Slave Mode.)
•
Manual
– Press Enter to go through Red, Green, Blue, White, Amber, and UV. Press
Up or Down to adjust color brightness on a scale of 0-255. Enter to save. This serves
as the Master Dimmer for all the Pre-set colors.
•
SHND
–Press Up to scroll through options: Color, Sound, and Fade. Enter to select
choice.
o
Color
– Pre-set colors (1-50), after color 50 is AUTO change (Speed 1-8).
After AUTO, is Custom Color A – E; Enter make a custom color. You can make
5 custom colors that will be saved under A through E.
o
Sound
– Sound 1 (auto change when hears sound & Fade when quiet). Sound
2 (Strobe effect when hears sound & Fade when quiet).
o
Fade
– Color Fade 1 through 10. Fast (1) to slow (10).
•
Boot Time and Work Time
– Current operating time and total run time
•
Battery Capacity
– Indication of Percentage left on the battery
•
LCD Display Time
– Choose to have the Display back lit Full On/10sec-60sec
•
IR INFA
– Enable or Disable
6
EchoICON and EchoEDGE Manual Eternal Lighting
Updated 07/19/2014
