Introduction:
Thank you for your purchase.
The EchoICON/EchoEDGE RGBWA+UV LED is a DMX
intelligent LED par light. This LED par light is for the serious production company looking
for high powered LED output with (8) 18Watt 6in1 RGBWA+UV LEDs. The CUBE Series
including the CUBE3, CUBE4, CUBE5, CUBEecho, CUBEechoUV, EchoICON and EchoEDGE as
well as the ElitePar Series are Designed in Houston, TX.
Unpacking:
Thank you for purchasing the EchoICON/EchoEDGE RGBWA+UV light fixture.
Every EchoICON/EchoEDGE RGBWA+UV has been thoroughly tested and has been
shipped in perfect operating condition. Carefully check the shipping carton for damage that
may have occurred during shipping. If the carton appears to be damaged, carefully inspect
your fixture for any damage and be sure all accessories necessary to operate the unit has
arrived intact. In the case damage has been found or parts are missing, please contact the
manufacturer or your dealer for further instructions. Do not return this unit to your dealer
without first contacting them.
Contents in each package: (1) EchoICON or EchoEDGE RBWA+UV, (1) IEC power cord,
(1) Bracket, (2) knobs, (4) washers.
FIRST CHARGE YOUR FIXTURE FOR 6 HOURS
.
Securely, plug the IEC power
cord in the Power Input on the side of the light fixture, and then plug into the
EchoICON/EchoEDGE charging road case or into a powerstrip connected to a wall outlet
that supports 100-220V/50-60Hz. Flip the 3-way black switch to CHARGE position, having
the red power button in the OFF position. Reference “How to Charge the CUBEecho” below.
On the back of the fixture, the Battery Charge Indicator will illuminate Red while charging
or illuminate Green when fully charged.
Warning!
To prevent or reduce the risk of electrical shock or fire, do not expose this unit to
rain or moisture.
Caution!
There are no user serviceable parts inside this unit. Do not attempt any repairs
yourself; doing so will void your manufactures warranty. In the unlikely event your unit
may require service please contact the manufacturer or your dealer.
How to Charge the CUBE Series Fixtures:
(Note)-there are two switches:
1.) The black switch is for the battery option use of this fixture. It is a 3-way switch;
Battery ON, OFF (neutral position), and CHARGE.
2.) The red switch is used for AC power operation.
How to charge the fixture: Plug the IEC power cord into the Power Input. Flip the 3-way
black button switch to the CHARGE position.
Caution!
Never have the battery button
flipped to the ON position and the Red Power button in the ON position at the same time,
while the IEC power cord is plugged into the fixture. However, you can operate the fixture
2
EchoICON and EchoEDGE Manual Eternal Lighting
Updated 07/19/2014
