6
Step 4: Attach the wall mount to the wall
After determining the ideal height on the wall for your television, follow the mounting instructions for
your type of wall construction: wood stud walls or masonry walls (concrete, brick, or stone).
Do not use wall anchors in wood stud walls.
4. Use the Socket tool (L), the two Long Bolts (A), and Washers (C), to attach the wall mount to the wall.
Tighten the Long Bolts (A) securely and then loosen each bolt 1/2 turn. Shift the bottom of the wall
mount to insure the mount is perfectly level. Tighten the top Long Bolt (A) securely before tightening
the bottom Long Bolt (A).
3. Use 3/16” (5mm) drill bit to pre-drill holes at least 2.5” inches (65mm) deep at the marked locations.
2. Place the wall mount flat against the wall with the center of the mount in the desired location,
aligning the holes in the mount with the stud (Fig 3b). Use the wall plate as a template to mark the
location of the two mounting holes on the wall. Make sure that the mounting holes are in the exact
center of the stud.
1. Use a pencil, awl, or a nail to mark the location of the wall stud centers (Fig 3a) after locating the
stud with an electronic stud locator.
Wood Stud Walls
2-1/2” (65mm)
Fig. 3a
Fig. 3b
Fig. 3c
Wood stud walls
A
A
C
C
Summary of Contents for EX350SS
Page 2: ......
