1. Place the
Wall Plate (1)
flat against the wall in the desired mounting location. Use the
Wall Plate (1)
as
a template to mark the mounting holes on the wall. Make sure that the mounting holes are level and are
parallel.
3. Insert a
Concrete Anchor (B)
into each pre-drilled hole and lightly tap it with a hammer until the
Concrete Anchor (B)
is flush with the wall.
2. Use a 3/8” (10mm) drill bit to pre-drill two holes at least 2.5” (65mm) deep at the marked locations.
4. Use the
Long Bolts (A)
and
Long Bolt Washers (C)
to attach the
Wall Plate (1)
to the wall with the
Concrete Anchors (B)
as shown in Fig. 2.
5. Use a level to make sure the
Wall Plate (1)
is perfectly straight and securely tighten the
Long Bolts (A)
using a proper size wrench. Make sure to tighten the top bolt first, then re-check the level before
tightening the bottom bolt.
Do not use the Concrete Anchors (B) for drywall installation. Use of Concrete Anchors
for drywall installations can result in personal injury or product damage.
5
2.5” (65mm)
A
B
C
Fig. 2
1
