background image

5

CD CARE & MAINTENANCE 

Handling CDs

Holds a CD by its edges .Avoid touching the recorded side of the disc. To remove a 
CD  from  its  storage  case,  press  down  on  the  center  retention  mechanism  of  the 
case and lift the disc. 

Cleaning the CDs 

Use a dry cloth to wipe off any fingerprints and dusts from the playing surface of 
the disc. Wipe in a straight line radiating from the center to the outside edge of the 
disc.  Small dusts particles light stains will not affect playback quality . 

◆ 

Never  use  chemical  such  as  record  sprays, anti-static  sprays, benzene, or 

thinners to clean your CDs. 

◆ 

To reduce the risk of scratches , always  put CDs back in their case after use , 

◆ 

Do  not  subject  CDs  to  prolonged  exposures  to  direct  sunlight, high 
humidity, or high temperature. 

◆ 

Do not place stickers or labels on either side of the CD. 

Cleaning the CD Player lens 

A dirty lens can cause CD playback to skip .If the lens is very dirty , the CD may 
not work at all. Unplug the power supply, open the CD door, and clean the lens 
as follows : 

◆ 

For Dusts or Dry Particles – use a camera lens brush /blower to blow on the 
lens a few times. Then wipe the lens with the brush, and blow on the lens once 
more . 

◆ 

For  Fingerprints  –  use  a  dry  cotton  swab  to  wipe  the  lens  in  a  straight  line 
radiating from the center to the outside edge. 

Summary of Contents for e709













Reviews: