Page | 5
Maintenance
The device is almost maintenance-free. Nevertheless, the device should be cleaned regularly. If the
unit is not cleaned regularly, the light output of the unit will be considerably reduced over time.
Disconnect the unit from the mains and wipe it with a damp cloth. Never immerse the unit in any
liquid. Clean the unit with a soft cloth. Do not use alcohol or solvents. The connections should also be
cleaned regularly. Disconnect the device from the mains and wipe the connections with a cloth.
Ensure that all connections are completely dry before you connect or reconnect the device to other
devices.
The operator must ensure that all safety-relevant and mechanical devices are subjected to a
technical inspection test by qualified personnel after four years. The operator must ensure that all
safety-related and mechanical devices are inspected once a year by qualified personnel.
The following points must be considered during the inspection
:
1.
All screws used to install the product or parts of the product must be secured and not
corroded.
2.
Neither the housing nor the fixtures or the places where the product is attached may be
deformed.
3.
Mechanically moving components, s
uch as axes, lenses, etc., must not have any wear marks.
4.
Power cables must be undamaged and must not show any signs of material fatigue.
Replace fuse
Overvoltages, short circuits or unsuitable mains connections can cause a fuse to burn through. The
device does not work when the fuse is blown. If your device burns a backup, perform the following
steps.
1.
Disconnect the mains plug.
2.
Insert a flat screwdriver into the slot of the fuse cover. Lever the cover gently. The fuse now
comes to light.
3.
Remove the old backup. If you look brown or milky, it is burned.
Summary of Contents for E60 Spot
Page 1: ...LED Moving Head E60 Spot ...
