Seite 38
CAUTION Risk of fire!
When installing the appliance, please ensure that there are no easily
flammable materials (decoration, etc.) at a distance of at least 0.5 m.
The device can be placed directly on the ground or installed in any possible position in the trussing
without changing its functional properties.
The projectorbase can be installed in two different ways.
Always secure the projector with an appropriate safety cable when installing the head (assembly
height> 100 cm).
Only safety ropes and quick coupling joints according to DIN 56927, Shackle according to DIN EN
1677‐1 and BGV C1 Kettbiner may be used. The safety ropes, quick couplings, shackles and warp ties
must be adequately dimensioned and applied correctly on the basis of the most recent occupational
safety regulations (eg BGV C1, BGI 810‐3).
Please note:
For overhead mounting in public or commercial areas, a large number of regulations
must be observed which can only be reproduced here. The operator must independently seek and
comply with the applicable safety regulations!
The manufacturer is not liable for damages caused by improper installation and inadequate safety
precautions!
Hook the quick‐release fastener into the provided eyelet eyelet on the bottom of the device. Route
the safety cable over the beam or a secure mounting point. Hook the end into the quick‐release
fastener and tighten the locknut securely. The maximum drop distance must not exceed 20 cm. A
safety cable which has been subjected to a crash or is damaged is not allowed to be used as a safety
cable.
CAUTION Danger to life!
The device must be checked by an expert before commissioning
!
