Special function introduction and application
1. The O/S/C interface available
Add another O/S/C button to open or close the door.
2. The photo beam interface available
When connecting
pulsed quantity control infrared sensor, wiring as Fig.12. When infrared
sensor is controlled by switch value, wiring as Fig.13.
Notice: Close the photo beam
function when you don’t use photo beam sensor.
3. Flash light function (optional)
There are corresponding interfaces for this function and provide 24v-35v flash light
voltage. Connect the flash light with DC 24v-28v, current≤100mA. When use AC 220V
power flash lights, please match an adapter, and wiring as required(Fig.14).
4. Pass door (SD) protection (optional)
This function ensures that the door can’t be opened unless the small pass door is closed.
The door panel won’t be damaged. Connect according to Fig.15 .
Fig. 12
Fig. 13
Summary of Contents for 1000E
Page 14: ...Fig 14 Fig 15 ...