-19-
6
．
Data Access
Press
MEM
key to enter Data Access Model, the default display
stored in the first 01 Units
of data, shown in Figure 11. Then
the right arrow keys, up, read the
data stored, press the left arrow key,
scroll down to the data stored. If not store data, display shown in
Figure 12.
In setting Alarm Critical Value state, need to press the
ON/OFF
key
or press the
AL
key for 3 seconds, exit Alarm Critical Value state,
then press
MEM
key to enter data storage model.
7
．
Alarm Settings
In the test model, press
AL
key to turn on or shutdown alarm func-
tion.
In test model, press
AL
key for 3 seconds, then enter to set alarm
critical value function, temporality, the highest-digit flashing, first
set a maximum bit, shown in Figure 13, Figure 14. Press
AL
key to
switch to the low number, in the current digit flashing, press the
left/right arrow keys to change the "0,1, ... 9" figures, after the
number finished setting, press the
AL
key for 3 seconds to confirm
the current set alarm critical value, when set the alarm function
successful, opening alarm function,
then automatically return to
measurement mode. If the load
bigger than the alarm critical,
meter will be flashing an alarm symbol, also issued intermittent
