-7-
VII. LCD Display
⑴
. PEAK measurement mode symbol
⑵
. Symbol of low battery & voltage (display when below 4.8V)
⑶
. Symbol of data storage
⑷
. Symbol of data access
⑸
. 2-digital No. of data storage unit
⑹
. Current unit (mA or A)
⑺
. Data lock symbol
⑻
. Metrication decimal point
⑼
. 4-digital LCD figures display
⑽
. Symbol of AC
VIII. Method of Operation
1. Switch On/Off
Press
POWER
key to switch on, LCD display, in test mode, press
POWER
key to switch off. The meter will automatically power off after
booting 5 minutes later. If LCD display is darker, maybe the battery voltage
is too low, please replace batteries.
In data hold mode, firstly press
HOLD
key to cancel the lock, then
press
POWER
key to switch off.
2. Data Hold/Storage
In test mode, press
HOLD
key to lock currently displayed value and
display
“
HOLD
“
symbol. At the same time, this locked value as a set of data
followed by auto-ID and store, and
“
MEM
”
symbol flash one time. The meter
can store 99 sets of data. If the memory is full, display
“
FULL
”
symbol.
Summary of Contents for 7100
Page 1: ......