ETCR 6000, Manual, Page: 3 / 8

-2-
Warning
Thank you for purchasing our company's ETCR6000 AC/DC Clamp Leaker , for better use of this
product, please:
——
Read carefully the user's manual.
——
Follow strictly safety rules and notes listed in this manual.
u
Under any circumstances, please pay special attention to your safety in the course of using this
leaker.
u
Give heed to label texts and symbols on panel and back plate of this leaker.
u
Please be more careful if the line voltage is above 60VDC or 30VAC.
u
After power on, please first calibrate zero before measuring.
u
Put the tested wire through the geometrical center of jaw when measuring AC current, error will
increase if deviate the center.
u
Please don't place and store this leaker in hot and humid condition, locations with moisture
condensation and under direct sunlight for a long time.
u
In case voltage of battery was low, please replace batteries.
u
In case this leaker would not be used for a long time, please take out batteries.
u
When changing batteries, please pay attention to polarity of battery.
u
Use, disassembly and maintenance of this leaker shall be operated by authorized personnel.
u
In case dangers would have with continues use of this leaker, please stop to use it and seal it for
safekeeping immediately; and then, send it for disposal of authorized agency.
u
Users shall carry out operation based on danger signs
“ ”
on leaker and manual.
u
Users shall carry out safety operation based on instructions listed in this manual, e.g.
“ ”
and
danger signs on this manual.
I Introduction
ETCR6000 AC/DC Clamp Leaker is specially designed for measurement of AC/DC current; by
adopting up-to-date CT technology and digital integration technology. The small clamp is suitable for line
densely places (electric power measurement system, the high speed rail system, car circuit overhaul,
and so on), non-contact measurement, to ensure safe operation. It is a product with relatively small size,
high accuracy and perfect function compared with similar leakers in the world. The leaker could be
widely applied in those fields as electricity, communications, meteorology, railroad, oilfield, construction,
measurement, scientific & research teaching institutes, industrial and mining establishments. it is an
essential tool for electrician safety testing.
ETCR6000 AC/DC Clamp Leaker also named: DC Leakage Current Clamp Meter , Car DC
Leakage Current Clamp Meter , AC/DC Clamp Leakage Current Tester . It has those functions as data
holding and data storage. It obtains one RS232 interface, communication cable and software, through
which historical data inquiry is available, for reading, saving and printing.