ETC Installation Guide
XDLT 26°/36° Lens Tube Front Lens Kit
XDLT 26°/36° Lens Tube Front Lens Kit
Page 3 of 3
ETC
11.
Restore the upper lens tube housing, and
use the T20 TORX screwdriver to secure it
with the four screws.
Restore top
housing and
secure with
screws
12.
Place the lens tube on a flat surface with
the front lens facing up, and the side of
the lens tube with the accessory door
facing you.
13.
Insert the hinge screw on the right side
part of the way, and then slide the spring
over the screw end from inside the lens
tube housing. Hold the screw and spring
in place, and then position the accessory
door.
Insert screw into
housing, slip spring
over screw, and then
position door
14.
Position the tension spring on the left side
and hold it in place, and then insert the
screw into the housing and the spring.
15.
Use the hex key to tighten both hinge
screws.
Insert tension spring
and hold in place, and
then insert screw
16.
Restore the beam focus knob and washer,
and the screw and spacer on the opposite
side of the lens tube.
Restore
knob,
washer,
spacer, and
screw
