10
Unison Enclosure Install
4:
Remove the knockouts from the side conduit plug on the DRd and auxiliary enclosure before
installation. Only remove the knockouts that are adjacent to another enclosure.
5:
Install the DRd first, following the instructions as outlined in the DRd Enclosure Installation
Manual.
6:
Align the auxiliary enclosure against the left side of the DRd enclosure and mount it to the
previously installed mounting hardware. Notice, with conduit holes mated the bolt spacings are
on 16" centers (top left DRd and top left AX enclosure) for installation convenience.
7:
For cross-bussed DRd12 enclosure installations, install the second DRd12 by following steps 4
through 6 above.
8:
Check that each enclosure is level and plumb then tighten the mounting hardware for a secure
installation.
