Configure the Fixture
27
Re-Calibrate an Individual Feature
Navigate: Main Menu
→
Test
→
Calibration
Please contact Technical Services before using this parameter. See
You must enter the Calibration PIN in order to access the Calibration menu items. The default
Calibration PIN is 050.
Once you have accessed the Calibration menu, select an individual feature on the fixture and
manually calibrate it to a new "home" setting.
Note:
Changes you make to the fixture settings in the Calibration menu are not
changed if you reset the fixture to the factory default settings. The Calibration
settings are saved until they are changed in the Calibration menu.
Preset Menu
Navigate: Main Menu
→
Preset
Presets are built by combining scenes into programs and then assigning the programs to
Program Partitions for playback. For information about the Preset menu, access the
High End
Systems Preset Menu Guide
from the ETC support website:
.
