Configure the Fixture
17
Set Fixture Parameters
This section provides instructions to configure and set up the SolaPix 19 XT. See
for information about the navigation buttons.
Provide power to the fixture before configuring it. If you do not provide power, the fixture will
use battery power to power the user interface.
Address
Navigate: Main Menu
→
Address
The Address menu provides access to configure the three modules: Base, Flex, and Pixel. You
can configure each module individually, or you can compound some or all of the modules. For
information about the modules, see
Note:
Some consoles may refer to the Flex effects by the feature name "Macro". For
the purposes of the SolaPix 19 XT software and user manual, "Flex" and "Macro" are
interchangeable.
Navigate: Main Menu
→
Address
→
Base Module
Base module configuration is mandatory. You must configure this module for each fixture.
Settings
Value
Description
Source
•
DMX
•
Art-Net
•
sACN
Select the control source for the Base module.
Address
001–xxx
Set the DMX address for the Base module.
Universe
000–255
When using Art-Net or sACN control source, set the
universe.
