3
Program
61
Record the Stack from Bumps
This function allows you to create the Stack with referenced memories or intensity
channels. The steps are created as each bump button for a memory or intensity is pressed.
Action
Console
Feedback
1. Activate record
sequence
All buttons that can record in this mode will
blink at full in yellow (press
CLEAR
to exit).
2. Choose Stack
The moment the
STACK
button is pressed,
the button will light up in full. Now all bump
buttons can be stored as steps, and blink at
full in each fader mode.
3. If desired, set the times
for this step
Wheels 1 & 2
4. If desired, set Move Dark
mode
If off (unlit) all devices will move when
GO
is
pressed for this step. If on (lit) all devices will
preposition when this step is loaded to the
Next fader.
5. Select a source for this
step
...
You can select any
memory or intensity
channel.
Change fader page if desired.
When a bump button is pressed, that memory
or intensity will be stored as a reference to
this step.
Repeat steps 3-4 until satisfied.
6. End recording
End recording. The console will return to the
fader mode prior to recording this sequence.
Press
UNDO to skip the recording.
REC
SEQ
STACK
MOVE
DARK
1
24
REC
SEQ
Summary of Contents for SmartFade ML
Page 46: ...38 SmartFade ML v3 0 1 User Manual...
Page 72: ...64 SmartFade ML v3 0 1 User Manual...
Page 102: ...94 SmartFadeML v2 1 User Manual...
Page 103: ......
