MANUAL SGM700
77
3.1.14
Menu -CAL-
5.2
- - - CAL
Calibration settings
In this menu, the
Calibration settings
can be set. Options are:
CAL 1
Add calibration point
CAL 2
Check weigher information
CAL 3
Show/remove calibration points
CAL 4
Deadload compensation
CAL 5
Show CAL code
Press key 2 <2 sec to enter the calibration settings.
The following screen is visible:
In
CAL 1
you can set the
calibration points
for the weigher. Press key 2 <2 sec. to set the
calibration points.
After entering, the following screen is visible (if there are no calibration points
available):
And will automatically jump to:
