ETC Installation Guide
5" Touchscreen
Note:
Power must not be disconnected during
bootloader/firmware updates to the unit as corruption of the data
or software may occur, perhaps even rendering the unit
inoperable.
Installation
1. The 5" Touchscreen universal mounting plate installs to a
flush-mount or surface-mount back box in either the portrait or
landscape orientation.
Note:
Flush-mount installations require a back box with a
minimum of a 49 mm hole. Use the appropriate mounting
hardware for your installation back box (UNC 6-32 screw for US
back box, M3.5 flat head screw for UK back box, or M3 hex head
screw for EU back box).
Vertical mounted back box
(portrait operation)
Horizontal mounted back box
(landscape operation)
US single-gang back box shown.
2. Connect the Ethernet cable to the RJ45 port receptacle on the rear
panel of the touchscreen.
5" Touchscreen
Page 2 of 4
ETC
