M520 series oscilloscope with rollmode
User’s Guide
File | Exit –
Closes application.
Settings | Restore defaults –
Reloads oscilloscope settings loaded on the
application start.
Settings | Load settings
– Loads oscilloscope settings saved by selecting
“Settings | Save settings” menu item.
Settings | Save settings –
Saves oscilloscope settings to hard disk (to other file
than default settings).
Settings | Demo setup –
Opens window, where you can select signal
parameters in demonstration mode.
Settings | Color setup
– Opens window for color selection.
Settings | Tool tip help
– Activates/deactivates the tool tip help.
Settings
|
High priority
- Sets high priority execution of oscilloscope
application.
Help
|
Index –
Displays the Help index.
Help
|
ETC web
– Starts the internet browser installed in the computer to
display the ETC’s web site. This feature works only if the computer is already
connected to internet.
Help
|
Support
– Sends the e-mail message to the ETC’s customer support.
This feature works only if the computer has connection to internet.
Help | About
– Displays information about product.
4.15.1. Demo setup window
The demo setup window is opened after click on the main menu item.
Fig. 4.15.1.1. – Demo setup window
Channel A controls are located in left, channel B controls are located in the
right.
“Amplitude” – amplitude of demo signal in mV
“Period” – period of demo signal in ms
“Noise” – noise level in mV
4.15.2. Color settings window
The color settings window is opened after click on the main menu item.
- 20 -
