ETC Foundation Rigging Controller Product Information Manual Download Page 6

3

Foundation Product Information Guide

Responsible Use of Rigging Equipment

The operation of ETC Rigging

 equipment requires responsible use and specific training. 

Only authorized, trained personnel should operate rigging hoists and their associated 

control stations. Unauthorized use, alteration, or use for situations other than those for 

which it was designed may cause damage to the equipment, other property damage, or 

injury to persons, potentially of a severe nature. All safety precautions must be observed 

and adhered to at all times.

Read and obey the following warning statements to ensure safe and consistent use of your 

ETC Rigging system.

W A R N I N G :

Only properly trained and authorized persons should operate ETC Rigging 

systems. Operation by untrained persons may result in damage to the 

system, other property damage, serious injury, or death.

W A R N I N G :

When operating an ETC Prodigy Hoist, the user must have an unobstructed 

view of the entire line set and its attached load. If the user’s view is 

obstructed, a second person (spotter) MUST be used to assist the operator 

at all times. The spotter must have an unobstructed view of all moving 

components and be able to maintain clear communication with the operator 

at all times.
If a problem arises while a hoist is moving (such as a mechanical issue or 

interference from other objects) stop movement immediately by releasing 

the move button or using the Emergency Stop button. If a spotter sees a 

problem while a hoist is moving, the spotter must signal the user to stop 

movement immediately.

W A R N I N G :

ETC Prodigy hoists must only be used to move a maximum load equal to or 

less than the capacity of your specific hoist. Overloading the hoist may 

result in damage to the system, other property damage, serious injury, or 

death.

W A R N I N G :

ETC Prodigy hoists and Foundation control equipment should not be 

operated by a user until installation and configuration have been completed 

by an ETC trained and approved technician. Only ETC trained and approved 

technicians are authorized to operate equipment during the installation and 

configuration process.

W A R N I N G :

ETC Prodigy hoists and Foundation control equipment are designed for the 

raising and lowering of theatrical equipment within the approved hoist 

capacity only. This equipment is not designed to lift or automate personnel 

and such use is strictly prohibited.

W A R N I N G :

Disconnect power before servicing this equipment.

Summary of Contents for Foundation Rigging Controller













Reviews: