39
ElahoTouch User Manual
Files, Show files
You can open and save shows by going to Setup>Files
Pressing the Show Files button gives you the default show options.
Format
Show files in software version 2.6.0 and older are formatted as .json. From v3.0 onwards,
archive format .lsf is used, which bundles the .json show with other settings.
Functions
•
•
•
•
•
CAUTION:
All data is stored internally in non-volatile memory. Do not switch off the power
until any pending save operation is completed, or you may lose data. It is strongly advised that
you make periodic backups of important data to an external memory stick using the
function.
Save As Default
The current show will be saved as the default to be used each time Setup> File > New is
selected. Typically this will include a standard patch, but may also include any other show
elements.
CAUTION:
All data is stored internally in non-volatile memory. Do not switch off the power
until any pending
operation is completed, or you may lose data. It is strongly advised that
you make periodic backups of important data to an external memory stick using the
function.
Remove Default Show
The Default show is removed to a complete blank state with no patch or content at all.
Selecting File > New will start your device with no programmed content at all.
CAUTION:
All data is stored internally in non-volatile memory. Do not switch off the power
until any pending
operation is completed, or you may lose data. It is strongly advised that
you make periodic backups of important data to an external memory stick using the
function.
