11
Elaho Inspire Station Programming Guide
Program Zone Start
1.
Set the Function switch to its lowest position of Zone.
2.
Press and hold the [Record / Program mode] button for three seconds to enter Program
mode. The “Mode” LED illuminates (steady amber) and the first zone control button LED
flashes the current (first) zone controlled. (For example, if the first zone controlled is zone
5, the button LED will flash 5 times.)
3.
Push any station button to increase the starting zone number by one, the count always
begins at 1. The station will update the LED indication, flashing the LED to reflect the new
zone number. (For example, pushing the station button three times will set the first zone
for the station to zone 3). All station zone controls will be consecutively assigned
beginning with the specified count.
4.
When the desired zone number is set, press and release the [Record / Program mode]
button to save the new setting. The “Mode” LED turns off and the station LEDs will blink
the new setting before returning to normal operation
Note:
To change the zone button assignment to a lower number than what is
currently set, exit Program mode then reenter Program mode. The steps of exiting and
reentering Program mode start the zone start count back to 1.
Summary of Contents for Echoflex Elaho Inspire Station
Page 47: ...Station Miscellaneous 42 ...
