ETC Installation Guide
Echo-Echoflex Interface
Echo-Echoflex Interface
Page 6 of 15
ETC
Keycard Station
- Green - while keycard is inserted
- Red - while keycard is removed
Setting Target Lux using a Photo Sensor
Using the photo sensor that is linked to the EEI wireless input, tap the photo sensor’s teach button 3 times
to set the target lux. When the EEI receives this command, the INPUT STATUS LED for the associated
wireless input will blink once, and then four more times when the new target lux has been recorded.
Output Status
The OUTPUT STATUS LEDs display information about the currently selected wireless output.
When a wireless output is selected in normal operation, it's current output level displays on the OUTPUT
STATUS LED’s. The level indicated is the highest dimming (control) level detected for all Echoflex controllers
that are currently linked to the selected Echoflex output. All levels, between 0 and 100% are indicated with
a LED indicator.
For example:
• No LED’s indicate the current output level is 0% or that there are no Echoflex controllers associated
with the selected Echoflex Output.
• 5 green LED’s indicate the current output level is 50%.
• 10 green LED’s indicate the current output level is 100%.
System
Wireless Inputs
The four wireless inputs on the EEI convert Echoflex control inputs into Unison Echo control system actions.
Linking of Echoflex controls such as stations and sensors allows control of Echo presets.
Wireless inputs can be configured to recall a specific preset which is configured using Program Mode. See
. By default, the four wireless inputs are configured for Presets 1 through Preset
4, respectively.
Each wireless input allows linking of multiple Echoflex devices of the same matching type to share control
of the individual input. This allows multiple stations or sensors to be able to trigger the same input.
Wireless Outputs
The four wireless outputs on the EEI can be linked to Echoflex power control devices for combined control
with Echo zones. Each of the four outputs available are individually dimmable output circuits that
correspond to Echo zones within the selected Space.
Note:
When no Echoflex devices are linked to an Input, the [ON] and [OFF] buttons will behave
like a wireless Switch Station. The INPUT STATUS LED will also reflect use of the local [ON]
and [Off] buttons as green and red respectively.
Note:
The EEI supports a maximum of 35 Echoflex wireless devices.
