ETC Quick Guide
Desire Fixture Series
D22, D40, D40XT, D60, D60X Fixtures
Page 3 of 13
ETC
Connect
D22 Portable, D40, D40XT, D60 and D60X
1:
If using external DMX or RDM control, attach a 5-pin XLR cable to DMX In.
2:
Connect the power cable to AC power.
3:
Plug the XLR cable into the data source, if applicable.
4:
Link any additional fixtures via Power Thru and DMX Thru connectors. (The D22 fixture does not have
the Power Thru option.)
D22 Canopy and D22 Track
See the
Desire Series D22 Installation Guide
for details on connecting the canopy and track-mounted
versions of the D22 fixture.
Focus
D60X fixtures do not have the user interface
that other Desire fixtures do. For information
on setting up D60X fixtures, see
1:
Supply power and wait for the fixture
to boot up.
2:
Press [
] to open Presets &
Sequences.
3:
Select Focus and press [
] to turn on
the LED array.
4:
Adjust the position of the fixture.
5:
Once the focus is set, press [
] to turn off the LED array and then press [
] to return to the home
screen.
WARNING:
• Do not link more than nine fixtures when using Power Thru (non-dimming,
100 to 240 VAC, 50/60 Hz). Power Thru is not available on all Desire Series
fixtures.
• Up to 32 devices can be daisy-chained together per data run.
• Disconnect power and DMX before all cleaning and maintenance.
PUSH
Power In
DMX In
DMX Thru
Power Thru
(Power Thru not
available on D22)
***There is no user interface
on the D60X
