ETC Quick Guide
Desire Fixture Series
D22, D40, D40XT, D60, D60X Fixtures
Page 4 of 13
ETC
Address
A DMX address is not needed if using stand-alone or master/slave control.
1:
From the home screen, press [
] to open the Main Menu.
2:
On the Main Menu, scroll to DMX Start Address and press [
].
3:
Use [
] or [
] to scroll to the desired address.
4:
Press [
] to select the address number.
5:
Press [
] to return to the home screen.
Quick Setup
1:
On the Main Menu, scroll to Quick Setups and press [
].
2:
Scroll to the desired setup and then press [
]. An asterisk (*) indicates which setup is active.
3:
Press [
] to return to the home screen. The top line of the home screen displays the name of the
active setup.
Individual features and settings are adjustable in the Advanced menu. See the
Desire Series by ETC D22,
D40, D40XT, D60, D60X User Manual
for more information on advanced features of Desire fixtures.
Quick Color (Vivid, Lustr+, Fire and Ice, Studio HD)
Quick Color allows you to easily select a color and its intensity from a predefined menu. This feature
overrides any presets or sequences previously selected and is only available when there is no external DMX
signal to the fixture.
1:
Press [
] to open Presets and Sequences.
2:
Scroll to Quick Color and press [
].
3:
Scroll to Color and press [
].
4:
Scroll to the desired color and press [
].
5:
Scroll to Intensity and press [
].
6:
Scroll to adjust the intensity and press [
].
7:
To exit Quick Color, press [
].
Configure D60X using RDM
Up to 32 D60X fixtures can be daisy-chained on a DMX/RDM network. Each fixture can have a unique DMX
address and each address can be configured separately. Alternatively, more than one fixture can have the
same address, allowing you to configure them identically.
Use an RDM configuration tool or an RDM lighting control device to configure the fixtures. An RDM
configuration tool is installed on a PC, which is connected to the DMX/RDM network via Gadget II or a
DMX/RDM gateway. After the fixtures are configured, Gadget II or the gateway can be disconnected and
a DMX or RDM control device can be connected to the network for continued operation. For more
information on configuring fixtures using RDM, see the
Desire Series by ETC D22, D40, D40XT, D60, D60X
User Manual
. Download ETC documentation at
Note:
Exiting the Quick Color menu will return the fixture to the state it was in prior to entering
the menu.
