ETC Cyberlight LED, User Manual

Page: 25 / 48

Configure the Fixture 20
Set the Network Options
Note:
The Network menu is hidden when the Control Protocol setting is DMX.
Navigate: Main Menu → Settings → Network
Parameter Value Description
Universe
When sACN is the selected
Protocol, set a value of 1-256.
When Art-Net is the selected
Protocol, set a value of 0-255.
Sets the universe.
The default setting for sACN is 1.
The default setting for Art-Net is 0.
IP Address
When sACN is the selected
Protocol, the IP address
format is
192.XXX.XXX.XXX
When Art-Net is the selected
Protocol, the IP address
format is
010.XXX.XXX.XXX
Sets the IP address. Use the left (<) and
right (>) navigation buttons to select the
section of the IP address that you need to
change. Use the up and down navigation
buttons to change the selected value.
Note: If IP Mode is set to DHCP, the IP
address is assigned by the DHCP server
and you cannot change it. The phrase
"Waiting Address" appears below the IP
address when the fixture is waiting for an
IP address from the DHCP server. If the
DHCP server times out, "Timeout
Default" appears below the IP address
and the fixture uses the last assigned
IP address.
Net
(shown when
Art-Net is the
selected Protocol)
The default is 000.
Sets the subnet mask IP address for the
Art-Net protocol. Use the left (<) and
right (>) navigation buttons to select the
section of the IP address that you need to
change. Use the up and down navigation
buttons to change the selected value.
Note: If IP Mode is set to DHCP, the
subnet mask IP address is assigned by the
DHCP server and you cannot change it.
Subnet Mask
(shown when
sACN is the
selected Protocol)
The subnet mask IP address
format is 255.XXX.XXX.XXX.
Sets the subnet mask IP address for the
sACN protocol. Use the left (<) and right
(>) navigation buttons to select the
section of the IP address that you need to
change. Use the up and down navigation
buttons to change the selected value.
Note: If IP Mode is set to DHCP, the
subnet mask IP address is assigned by the
DHCP server and you cannot change it.
IP Mode
(shown when
sACN is the
selected Protocol)
Static IP
DHCP
Sets the IP mode.