ETC ColorSource Manual Download Page 3

Page: 3 / 3

Steps to Close Console

1. Install the curved bottom panel and reinstall the back panel screws

2. Install the flat bottom panel and reinstall all bottom screws

a. Note that the longer screws should be reinstalled in the middle (3) or (4) screw holes. Installing

these screws in any other place can damage the fader board or the control board

Parts

ETC Part Numbers
Short Screws: HWM1169
Long Screws: HWM2108

Updated: Fri, 17 Sep 2021 16:16:14 GMT

Summary of Contents for ColorSource

Page 1: ...ffiliates are not responsible for any damage or injury caused by service of our products by anyone other than us or our authorized service providers and such damage is excluded from the product s warr...

Page 2: ...rom the shorter screws I 20 fader consoles will have 3 long screws II 40 fader consoles will have 4 long screws 3 Remove the screws from the back panel the side with the DMX port s Remove the curved b...

Page 3: ...r screws should be reinstalled in the middle 3 or 4 screw holes Installing these screws in any other place can damage the fader board or the control board Parts ETC Part Numbers Short Screws HWM1169 L...

Brands by name