ETC Installation Guide
ColorSource Spot Pearl v1.7
Note:
The light source in this luminaire is not user-replaceable, and
must be replaced only by a qualified technician. Contact ETC
Customer Support for assistance.
Environment
The ColorSource Spot Pearl operates in ambient temperatures of 0°C–40°C
and comes with a variable-speed fan. The ColorSourceSpot Pearl is for indoor
use only.
•
Maximum recommended ambient operating temperature: Ta = 40°C
(104°F)
•
Maximum anticipated external surface temperature at 40°C ambient:
Tmax = 80°C (176°F)
•
External temperatures after 5 minutes of full-brightness operation at
25°C (77°F) ambient: 32°C (90°F)
•
External Temperature (steady state achieved) at 25°C (77°F): 50°C
(122°F)
Electrical
•
Operates between 100 V and 240 VAC at a frequency of 50/60 Hz.
•
Maximum power consumption is 230 W.
•
Up to 6 luminaires (15 A max) may be linked via power thru connector
(7 luminaires total per circuit) when used with an R20 Relay Module or
Unison Echo Relay Panel. Consult breaker trip curves when used with
other equipment. Requires power from a non-dimmable source.
•
Inrush:
-
120 V: 28 A (first half-cycle)
-
240 V: 46 A (first half-cycle)
Typical Power Consumption
100 V
120 V
230 V
Power
Current
Power
Current
Power
Current
Idle
1.93 W
0.05 A
1.87 W
0.05 A
1.6 W
0.06 A
Direct at Full
203 W
2.04 A
199.2 W
1.67 A
194.2 W
0.87 A
ColorSource Spot Pearl
Page 3 of 16
ETC
