ETC Installation Guide
ColorSource Spot Pearl v1.7
Re-record Presets
1.
Using DMX, set the desired levels for the new preset.
2.
Press the Mode button to access the Presets menu.
3.
Press the Up button or Down button to navigate to the preset number
that you want to re-record.
4.
Press and hold the Mode button for 3 seconds to confirm the preset
selection. The user interface will show a 3-second countdown. The
preset number blinks once to confirm that the preset has been
recorded.
Note:
When the fixture is in Direct mode (
dir
) or 1-channel mode
(
1ch
), you cannot re-record presets.
See
Change the DMX Control Mode on page 7
.
Adjust the Intensity of Presets
1.
Ensure that DMX data is not present.
2.
Press the Mode button to access the Presets menu, and then press the
Up button or Down button to select the preset that you want to edit.
3.
Press and hold the Mode button for 3 seconds. The display shows
L:
followed by either an intensity level from
0
–
99
or
FL
for full.
4.
Press the Up button or Down button to change the intensity level of
the preset in real time.
5.
Press the Mode button to confirm your selection and return to the
Presets menu.
The display will automatically return to the Presets menu after 10 seconds of
inactivity, and edits to the preset intensity will not be saved.
ColorSource Spot Pearl
Page 11 of 16
ETC
