Avab Jaguar
Change Configuration
Pronto_Peak603VL_eng
Version 1.2, Nov. 2003
– 30 –
Change Configuration for jaguar
To change configuration of jaguar (number of channels, attributes, outputs or unlocking of software options) you
need a new dongle code. Contact your dealer or transtechik. The new code has to be inserted into jaguar.
Figure 25: Display SKEYCODE
Procedure
1
Execute a shucctdown
2
Monitor displays C:\VLC>.
3
Input SKEYCODE starts configuration software. Monitor displays actual configuration.
4
Check serial number delivered with dongle code is identical to displayed number. If no, once again
contact your dealer or
transtechnik
. In any case end the operation.
5
Move cursor to window New code by using TAB key of external keyboard.
6
Type in delivered code.
Note upper/lower case characters and blanks!
7
Save code by typing key F7 (Write) on external keyboard.
8
If error message, repeat input.
9
The display below input window now shows new configuration.
10
End configuration by typing Alt-X
11
Restart console
