ENGLISH
37
By enabling the pH priority function, the instrument is able to first reach the
pH setpoint, then switch to product metering operations (oxidising or reducing
agent), thus assuring measurement stability
Manual temperature offset 0-100°C.
Press
◄►
to show the desired temperature.
Select AUTOMATIC offsetting for temperature offset measurements via
PT100 probe
To calibrate the temperature sensor, press
◄►
to edit the desired
temperature.
Modbus Address:
from 0 to 254
Modbus Baudrate:
transmission speed
TCP Address:
IP address
The above menus are ONLY displayed if the instrument of the eSelect M series is connected to the external RS485 / ETHERNET module
(for the settings, refer to the CONNECTION manual).
Adjusts display backlighting obtaining energy savings;
To select the language of the programming menu.
After selecting the Language (ITALIAN/ENGLISH), the programming menu adapts accordingly.
DATA RESET:
resets default factory settings. ONLY to be used when the parameters do not match or there are
programming issues or when the operator wishes to restart from scratch.
NOT
to be overused as many resets
may undermine the instrument’s efficiency.
◄
►
◄
►
By confirming
YES
, the display goes out for about 1 second, then goes back to the M E A S U R E M E N T D I S P L A Y
A
SETTINGS
pH priority
OF F
�
EXPERT MENU
�
SETTINGS
pH priority
ON
�
EXPERT MENU
�
SETTINGS
Temp. Sensor
Manua l
�
EXPERT MENU
�
SETTINGS
Temperature
25°C
�
EXPERT MENU
�
SETTINGS
Temp. Sensor
Automat ic
�
EXPERT MENU
�
SETTINGS
Temp. Calibrat.
100°C
�
EXPERT MENU
�
SETTINGS
Modbus Address
0
�
EXPERT MENU
�
SETTINGS
Modbus Baudrate
38400
�
EXPERT MENU
�
SETTINGS
TCP Address
192.168.1.100
�
EXPERT MENU
�
SETTINGS
Backlit.Min.Lev.
30%
�
EXPERT MENU
�
SETTINGS
Lingua
Ital iano
�
EXPERT MENU
�
SETTINGS
Reset
NO
�
EXPERT MENU
�
SETTINGS
Reset
Y ES
�
EXPERT MENU
�
SETTINGS
CONFIRM?
NO
�
EXPERT MENU
�
SETTINGS
CONFIRM?
Y ES
�
EXPERT MENU
�