Etatron eSelectM 2 PH-CL, Operatinginstructions And Maintenance, Page: 25 / 40

ENGLISH 25
* By selecting M e a s u r e m e n t T y p e RX ,
S S E T P O I N T 1 , S E T P O I N T 2 and
C C A L I B R A T I O N the reading will be R X (m V )
*Selecting the setting C h l o r i n e S c a l e , S E T P O I N T 3
and C A L I B R A T I O N will be followed by values in the
previously selected Chlorine scale range.
◄ ► ◄ ► ◄ ►
◄ ► ◄ ► ◄ ►
◄ ► ◄ ►
Press O K / M E N U to confirm the selection and to go on to the next sub-menu.
Press E S C to go back to the M E A S U R E M E N T D I S P L A Y
SETPOINT 1 PH AND SETPOINT 1 RX > EXPERT MENU
SETPOINT1 PH SETPOINT1 RX
The two programming stages are below: when Measurement Type pH is
selected, refer to the left column; when selecting RX refer to the right
column.
The setpoint activates the output relays for the metering pumps or other
devices until the setpoint value is reached.
Setpoint 1 is set for operations in
ACID mode, the output is active
when the measured value is higher
than the selected setpoint, the
connected pump meters out an acid
product.
Setpoint 1 is set for operations in
DIRECT mode: the output is active
when the measured value is lower
than the selected setpoint, the
connected pump meters out an
oxidising product.
Menu Selection
4-20mA1 (p H )*
Menu Selection
4-20mA2 (Cl)
Menu Selection
Calibr at.M1(p H )*
Menu Selection
Calibr at.M2( Cl)**
Menu Selection
Start/S top times
Menu Selection
Aux Outp ut #1
Menu Selection
Aux Output #2
Menu Selection
Settings
Menu Selection
Setpoint 1 (p H )
Menu Selection
Setpoint 1 (RX)
MENU SETPOINT 1 (pH)
Setpoint Value
7.00 pH
�
EXPERT MENU
�
MENU SETPOINT 1 (RX)
Setpoint Value
200 mV
�
EXPERT MENU
�
MENU SETPOINT 1 (pH)
Metering
Acid
�
EXPERT MENU
�
MENU SETPOINT 1 (RX)
Metering
Direc t
� EXPERT MENU �
MENU SETPOINT 1 (pH)
Metering
Alk aline
�
EXPERT MENU
�
MENU SETPOINT 1 (RX)
Metering
Revers e
�
EXPERT MENU
�