3
SAFETY
Warnings
Carefully read the warnings listed below as they contain important information regarding safety during installation,
use and maintenance
.
Keep this manual in a safe place for further consultation.
This equipment complies with the 2004/108/EEC directive regarding “electromagnetic compatibility” with the 2006/95/CEE
“low voltage directive”.
NB: The pump is manufactured to high working standards. Its working life will be longer and its mechanical/electrical
reliability will be more efficient if used correctly and if subject to regular maintenance.
WARNING: Any internal repairs or operations to the equipment must be carried out by qualified and authorized personnel.
The manufacturer declines all responsibility whatsoever due to non observance of these regulations
Symbols used in this manual
FORBIDDEN
Before safety information, it
highlights an operation not to be
performed.
ATTENTION
Before a very important notes regarding
health protection for the exposed
personnel or regarding the machine
itself.
INFORMATION
Before information regarding
equipment use.
Dangerous and/or toxic liquid dosage
To avoid damage to persons and property due to contact with dangerous liquids or by the inhalation of toxic vapours, always
adhere to the instructions container in this booklet and keep in mind the following regulations:
Perform operations according to the instructions of the liquid manufacturer.
Check the hydraulic parts of the pump for damage and breakages and only use the pump if it is in perfect working
order.
Use small piping fit for the liquid being used and for the plant operating conditions, if necessary, insert the tube inside
PVC protection conduit.
Before deactivating the dosing pump, neutralize the hydraulic part using an appropriate reagent.
GENERAL REGULATION
