ETAS XETK-S22.0 User Manual Download

Page: 7 / 84

ETAS

About this Document

XETK-S22.0 - User’s Guide

1.3

Typographical Conventions

Software

Hardware

1.4

Presentation of Supporting Information

OCI_CANTxMessage msg0 =

Code snippets are presented on a gray back-
ground and in the Courier font.
Meaning and usage of each command are
ex-plained by means of comments. The
comments are enclosed by the usual syntax
for comments.

Choose

File



Open

Menu commands are shown in boldface.

Click

Buttons are shown in boldface.

Press <E

NTER

Keyboard commands are shown in angled
brackets.

The "Open File" dialog box is
displayed.

Names of program windows, dialog boxes,
fields, etc. are shown in quotation marks.

Select the file

setup.exe

Text in drop-down lists on the screen, pro-
gram code, as well as path- and file names
are shown in the Courier font.

distribution

is always a one-

dimensional table of sample
points.

General emphasis and new terms are set in
italics.

Bold

Menu commands, buttons, labels of the product

Italic

Emphasis on content and newly introduced terms

NOTE

Contains additional supporting information.

Summary of Contents for XETK-S22.0





















































































Search results

Summary of Contents for XETK-S22.0

Reviews:

Related manuals for XETK-S22.0

Brands by name

Popular brands

ETAS XETK-S22.0, User Manual

Search results

Summary of Contents for XETK-S22.0

Reviews:

Related manuals for XETK-S22.0

Brands by name

Popular brands