ETAS
Installation
FETK-T3.0 - User’s Guide
35
5.1.4
Mounting the FETK-T3.0 to the ECU Metal Housing
On the Gap Pad, remove the second transparent backing material from the Gap
Pad. Mount the FETK-T3.0 with attached Gap Pad to the ECU housing as
depicted in figures “FETK-T3.0 mounting materials” on page 35 and “FETK-T3.0
mounted” on page 35.
Fig. 5-3
FETK-T3.0 mounting materials
Fig. 5-4
FETK-T3.0 mounted
CAUTION
Thermal transfer from the FETK-T3.0 to the ECU housing!
When you mount the FETK-T3.0 to the ECU, you must ensure that a constant
gap of 3 mm is maintained between the FETK-T3.0 PCB and the flat surface
of the ECU housing.
CAUTION
CON4 is on the bottom side (Gap Pad side) of the PCB!
You must ensure that the ECU housing has an opening or cavity to ensure
that the CON4 does not collide with the ECU housing (see Fig. 7-5 on page 63
and Fig. 7-6 on page 64 for mechanical dimensions).
M2.5 screws 4x
FETK-T3.0
3mm spacer
ECU housing
M2.5 nuts
4x
Gap Pad
