ETAS
Installation
FETK-T3.0 - User’s Guide
33
5.1.2
Mounting Material
For mounting the FETK-T3.0 to the ECU housing, the following parts are recom-
mended:
• Four screws M 2.5
• FETK-T3.0
• Gap Pad, as supplied with the FETK-T3.0 or available as a spare part.
• Four 3.0 mm height spacer, M2.5
• ECU metal housing with machined holes aligning with FETK-T3.0 hole
pattern (see "Mechanical Dimensions" on page 62)
• Four nuts M2.5
See figure “FETK-T3.0 mounting materials” on page 35
5.1.3
Placing the Gap Pad on the FETK-T3.0
1. On the Gap Pad, remove the blue colored adhesive backing.
This will expose a tacky surface of the Gap Pad that will enable
the Gap Pad to adhere to the FETK-T3.0.
2. Place the Gap Pad (tacky surface side down) onto the FETK-
T3.0 as depicted in the figures “FETK-T3.0 bottom side view”
on page 33 and “FETK-T3.0 with properly positioned Gap Pad”
on page 34.
Fig. 5-1
FETK-T3.0 bottom side view
Devices to cover
with Gap Pad
