ETAS
Introduction
10
3
Introduction
ETAM3 adapts ECU a 10 pin SAMTEC TFM-105 connector to an XETK. To increase to
signal-noise ratio there is a buffer in the /TRST line supplied by the VDD(Sense) Voltage.
L-FAST Mode is not possible with the ETAM3 adapter.
3.1
View
NOTE
Minimum bending radius for the flex foil is 3mm.
4
Technical Data
4.1
ECU Connector
In order to be able to use the ETK adapter ETAM3 in the ECU, a 10 pin SAMTEC
connector (e. g. TFM-105-02-S-D-P) must be available on the ECU. JTAG or DAP mode
depends on the used FETK or XETK.
Pin Number JTAG Mode
DAP Mode
1
GND
GND
2
TCK
DAP0
3
/TRST
/TRST
4
TDO
DAP2
5
TMS
DAP1
6
TDI
-
7
WDGDIS
WDGDIS
8
VDD (Sense)
VDD (Sense)
9
/RESETOUT
/RESETOUT
10
/PORESET
/PORESET
i
