ETAS
Getting Started
ES650.1 - User Guide
25
Special connection cables that can be ordered separately are available for con
-
necting the analog input voltages. An overview is contained in Chapter “Order
ing Information” on page 40. To manufacture the connection cables yourself,
see the information about pin assignment in Section “Pin Assignment” on
page 34. When manufacturing the connection cables yourself, make certain
that the shielding and the ground signals are routed properly.
To use a single ES650.1 on a host PC:
1. Connect the sensors and transducers to the inputs of the
ES650.1.
2. Write down which signal you have connected to which input of
the ES650.1. Use the configuration sheet in Section “Configu
ration” on page 43 for this purpose. Be sure not to exceed the
maximum allowed input voltages, common-mode voltages,
and maximum insulation voltages between the channels.
3. Connect the combined Ethernet cable/power supply cord with
the
7-29 V / HOST
port of the ES650.1, observing the color
coding of the connectors.
4. Connect the RJ-45 connector with the available Ethernet inter
-
face port of your PC.
5. Connect the power supply connector of the combined cable to
the power supply you want to use. Observe the current con
-
sumption of the ES650.1 and the range of its supply voltage.
The allowed values are specified in Section “Electrical Data” on
page 32.
6. Start INCA. For information on the configuration and on data
acquisition, refer to the INCA Online Help.
To use the ES650.1 with additional ES6xx series devices:
1. To use your ES650.1 with several ES6xx series devices, con
-
nect the
7-29 V / HOST
port of the ES650.1 to an ES600 via a
CBE130 or a CBE140 cable that can be ordered separately. Be
sure to observe the color coding of the connectors. For further
information on this, see the ES600 User Manual.
2. Start INCA. For information on the configuration and on data
acquisition, refer to the INCA Online Help.
NOTE
Carefully check the names of the cables used. The wrong cables can keep
your ES650.1 from functioning properly or damage the ES650.1 and devices
connected to it.
