ETAS
Hardware Description
ES593.1-D
-
User Guide
14
4
Hardware Description
This chapter provides you with an overview of the ES593.1-D with information
on the housing, serial number, ports and LEDs.
4.1
Overview
The ES59x line is a range of powerful ECU and bus interface modules. The
ES59x modules have an upstream Ethernet interface that guarantees data
exchange with the host PC or with a Drive Recorder. The ES593.1-D module has
two downstream Ethernet interfaces that can be connected with ES59x, ES600,
measurement and interface modules.
Fig.
4
-
1
View of the Device
Individual measurement, calibration and rapid prototyping modules are easy to
combine with ES59x line modules. ECUs that have an XETK, or ECUs that have
their own Ethernet interface can be connected directly with an ES593.1-D mod
-
ule and communicate with INCA via Ethernet. The ES593.1-D has the ECU inter
-
faces ETK and CAN.
Two of the four CAN interfaces additionally offer a "Wake-Up" function and buf
-
fer CAN messages until a ES720 Drive Recorder connected to the ES593.1-D
starts the data recording.
If necessary, systems can be cascaded using ES59x nodes. The Ethernet
switch guarantees the time-synchronous sampling of all measurement chan
-
nels – even in sizeable module networks.
The ES593.1-D module and the relevant cables are intended for use in the lab,
on the test bench and in the passenger cell of vehicles.
4.2
Features
Overview of the major features of the ES593.1-D:
• Ethernet switch with a 10/100 Mbit/s data rate:
– One host port (upstream)
– Two ports for compatible modules (downstream)
– Can be cascaded up to 15 modules
– Automatic standby function