Operation
9
2
Operation
Congratulations! You are the proud owner of an ES590 ETK, CAN and K-Line
Module. We hope you will enjoy working with this device. This chapter tells
you all about getting started with your ES590 module.
Make sure your device was delivered with all its component parts before you
start using it.
2.1
Delivery Scope
The following belong to the delivery scope of the ES590 ETK, CAN and K-Line
Module:
•
the ES590 unit
•
an onboard power supply cable CBP 120-2, 2 m long
•
an Ethernet cable CBE 100-3, 3 m long
•
User’s Guides in both German and English
If necessary, you can order further connection cables for the connection to the
ECU as well as various extension cables from ETAS. For more details, please
refer to the section "Accessories" on page 29 of this manual or consult the
ETAS Product Catalog.
2.2
Description of the Device
The cable connections for the ECU interface of the ES590 are on the front of
the device. In addition to the ETK interface, there are also two CAN interfaces
and an interface for the K-Line. The LEDs indicating power supply, data trans-
fer and error operation are also on the front of the device.
Fig. 2-1
The Front of the ES590
ETK
ER
TX
ON
ES590.1
CAN1
CAN2
K-Line
0248325
